top of page


Join date: May 14, 2022

0 Like Received
0 Comment Received
0 Best Answer

Aten Uc232a Usb To Serial Drivers [April-2022]




aten uc232a usb to serial drivers You may unplug and replug your USB device repeatedly until you find it works in Linux. If you want to connect the uc232a to Linux system directly. Connect a 35 cm RS232 cable to your Linux system, you should check if it is RS232 protocol supported. For Linux users. In most Linux distributions, there is no uc232a specific driver. You need to use the kernel's built-in driver(s) to connect to the uc232a device. As we know, usb-serial needs a driver to be working. While a usb-serial converter like UC232A only has a external RS232 cable to work. If you are using Linux to connect to uc232a. You may follow a simple procedure to install the uc232a driver. First, find your uc232a board under /dev/serial. In Linux, uc232a serial port is usually located in /dev/serial/by-id/usb-**F00**a You may select a uc232a serial port under the **F00**a port. For example, /dev/serial/by-id/usb-0000:00:1a.0/by-path/F00a Open a terminal window and type the below command to check if uc232a is properly installed. ls /dev/serial/by-id/usb-0000:00:1a.0/by-path/F00a If you see a file called uc232a, the uc232a is installed. If you don't see a file called uc232a. Run the below command to install the uc232a driver. wget unzip cd uc232a_drv_1.0.0 sudo make install Reboot your computer. After the uc232a driver is installed. You may test if your uc232a device can be recognized. In Linux, uc




Profile: Members_Page

Aten Uc232a Usb To Serial Drivers [April-2022]

More actions
bottom of page